Designed for creating T-slot wall panels and Radiused edges on the T-slots (allow easier adjustment of fixtures on the completed wall panels). Bits are not designed for plunging operations. For best results use in CNC & table-mounted routers.
A 3/8" groove is made first with a straight router bit or dado blade. Followed by a cut with our T-slot bit to make a track.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.