67115
Amana Tool RC-1230 Insert Solid Carbide Flush Trim Template 3/4 D x 30mm CH x 1/2 Inch SHK w/ Upper Ball Bearing Router Bit
Amana Tool® Item #RC-1230
$167.95
$125.96
Free shipping on orders $49 and up
Replacement Insert Knives
*Sort the Table by clicking on the Column Heading
| Type | Description | Dimensions | Brand | Tool No | Our Price | Wish List | Ready To Buy | |||
|---|---|---|---|---|---|---|---|---|---|---|
| General Purpose Wood, Chipboard, Plywood | 29.5 x 12 x 1.5mm Straight Edge | - | Amana Tool RCK-30 Solid Carbide 4 Cutting Edges Insert Replacement Knife for MDF, Chipboard, Solid Surface 29.5 x 12 x 1.5mmMore info | Amana Tool | RCK-30 | $9.80$7.35 | ||||
| Solid Wood | DLC Coated* Straight Edge | 29.5 x 12 x 1.5mm | Amana Tool RCK-30-DLC Solid Carbide 4 Cutting Edges Diamond-Like Carbon (DLC) Coated Insert Knife for Solid Wood 29.5 x 12 x 1.5mmMore info | Amana Tool | RCK-30-DLC | $16.90$12.68 | ||||
| Softwood/Hardwood | 29.5 x 12 x 1.5mm Straight Edge | - | Amana Tool SRK-30 Solid Carbide 4 Cutting Edges Insert Replacement Knife for Soft/Hardwood 29.5 x 12 x 1.5mmMore info | Amana Tool | SRK-30 | $14.35$10.76 | ||||
| MDF, Chipboard, Solid Surface | 29.5 x 12 x 1.5mm Straight Edge | - | Amana Tool HRK-30 Solid Carbide 4 Cutting Edges Insert Replacement Knife for MDF, Chipboard, Solid Surface 29.5 x 12 x 1.5mmMore info | Amana Tool | HRK-30 | $17.60$13.20 |
*Diamond-Like Carbon (DLC) is a nanocomposite coating that has unique properties of natural diamond low friction, high hardness and high corrosion resistance.
Re-Ordering Knife Screw and Collar List
Included Knife Screw
Included Collar
47739
Insert Carbide Flush Trim Router Bits
Insert carbide is the economical way to go. Each knife has two edges; saves down time. Great for applications such as: hard/softwood, MDF, solid surface, chip board and plywood.
#RC-2400 is meant for difficult work, the knives are held with 3 screws.
Insert carbide is the economical way to go. Each knife has two edges; saves down time. Great for applications such as: hard/softwood, MDF, solid surface, chip board and plywood.
#RC-2400 is meant for difficult work, the knives are held with 3 screws.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.