AGE Series STL305-60 Carbide Tipped Steel Cutting 12 Inch D x 60T WWF, 1 Inch Bore, Circular Saw Blade

Carbide tipped blades for alloy and virgin steel designed to easily cut through steel studs, steel sheets, metal rods, steel pipes, channels & rebar. Specially designed carbide grade resists breakage & lasts longer than standard carbide or abrasive discs. The ideal blade for cutting through all sorts of metal due to its unique tooth geometry, special carbide & its chip limiting steel support.

Note: For optimal results and to extend tool life please use mist lubricant system or air cooling. Please inspect cut and adjust accordingly.

• Easily cuts through steel studs, sheets, rods, pipes, channels and rebar**
• Special carbide grade resists breakage & lasts longer
• Chip limiting steel support to prevent over feeding

*WARNING! STL254-52, STL-305-60, STL305-80, STL355-72, STL355-90, STL400-84: For use with low RPM chop saws only. For use with low RPM chop saws only. Steel Cutting Blades can only be used on dry-cutting chop saws like Jepson™, so long as the recommended RPM is not surpassed. Ganging of materials being cut is not recommended & damage to machinery, saw blades or serious injury to personnel could result! Please refer to your machine owner’s manual.

*Advertencia! STL254-52, STL-305-60, STL305-80, STL355-72, STL355-90, STL400-84: Solo para uso en maquinas con bajo RPM. Las sierras para corte de metales pueden utilizarse en maquinas de corte seco como Jepson, con tal que no se exceda el RPM recomendado. Para informacion adicional consulte con el manual de uso de la maquina.

Safety Guidelines for Saw Blades.

**Cutting high strength rebar materials will reduce blade life due to material toughness.