Amana Tool 61292 Insert Carbide Spiral Jointing 62mm D x 80mm CH x 12 Teeth x 1-1/4 Bore Shaper Cutter

Amana Tool® Item #61292
$236.75
$213.08
Free shipping on orders $49 and up

Re-Ordering Insert Knives List

Included General Purpose
Solid Carbide Insert Knives
Optional DLC* Coated Insert Knives
Optimal for cutting Solid Wood


RCK-70 (14 x 14 x 2mm)
61292 = 12 Qty
61295 = 18 Qty

 


RCK-70-DLC (14 x 14 x 2mm)
61292 = 12 Qty
61295 = 18 Qty

*Diamond-Like Carbon (DLC) is a nanocomposite coating that has unique properties of natural diamond low friction, high hardness and high corrosion resistance.

Re-Ordering Torx® Screw and Torx® Key List

Included Torx® Screw
Included Torx® Key


67154


5015

Hard wearing aluminum body complete with 4-sided solid carbide insert knives produces cuts so smooth it practically eliminates sanding. The secret is in the spiral pattern of the twelve individual knives. Unlike conventional cutterheads, there is always a knife in contact with the surface of the stock. This unique design totally eliminates the rippled, textured surface normally associated with wing type cutterheads. Suitable for planing and jointing in softwood, hardwood and man-made boards on a spindle molder.

HOW TO SHARPEN Sharpening is easy, too. When the long lasting solid tungsten carbide knives show wear, simply rotate each knife a quarter turn. That’s it.

PATTERN SHAPING Can be used with a bearing guide and ring fence for planing and routing curved work pieces with a template. If Rub Collar is needed, the correct rub collar is for #61292 is #61596, for #61295 use #61650

RESULT Produces cuts so smooth it practically eliminates sanding. Each cutterhead features:

  • Lightweight aluminum alloy construction with precision ground, micro-grain carbide knives.
  • Positive locking system to hold the knives, which ensures exact indexing, less down-time and more production.
  • Unique spiral/staggered design utilizing insert carbide knives, each having 4 cutting edges.
  • Manufactured to strict 'BG' specifications, which limits the chip thickness for a safer, more controlled cut.

Standard bore is 1-1/4" | Includes Torx® key

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Up Copyright © 2023 Toolstoday. All rights reserved.