Amana Tool DT420T721-60A Carbide Tipped Ditec 2000 Panel 420mm D x 72T TCG, 18 Deg, 60mm Bore, Scoring Set
Unique, long-life saw blades made for cutting chipboard and plywood with/without coating. Teeth are produced from special micro-grain quality, thus durable against wear while working with abrasive material. Intended for table saw and panel sizing machines. It's straightening maintained for a long period due to unique method which does not harm the structure of the saw body steel. With the use of static balancing, increased stability is ensured to preserve the machine bearings.
Instructions for grinding:
• For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.
• Damaged teeth can be replaced, however, replacing of a large number of teeth will, of course, shorten the life of the saw blade.
• Since the carbide in the DITEC™ is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC™ carbide.Safety Guidelines for Saw Blades.