67115
Amana Tool RC-49360 Insert Superabbet Jr 2 D x 30mm CH x 1/2 Inch SHK Router Bit
Amana Tool® Item #RC-49360
$227.75
$170.81
Free shipping on orders $49 and up
Replacement Insert Knives
*Sort the Table by clicking on the Column Heading
| Type | Description | Dimensions | Brand | Tool No | Our Price | Wish List | Ready To Buy | |||
|---|---|---|---|---|---|---|---|---|---|---|
| General Purpose Wood, Chipboard, Plywood | 29.5 x 12 x 1.5mm Straight Edge | - | Amana Tool RCK-30 Solid Carbide 4 Cutting Edges Insert Replacement Knife for MDF, Chipboard, Solid Surface 29.5 x 12 x 1.5mmMore info | Amana Tool | RCK-30 | $9.80$7.35 | ||||
| Solid Wood | DLC Coated* Straight Edge | 29.5 x 12 x 1.5mm | Amana Tool RCK-30-DLC Solid Carbide 4 Cutting Edges Diamond-Like Carbon (DLC) Coated Insert Knife for Solid Wood 29.5 x 12 x 1.5mmMore info | Amana Tool | RCK-30-DLC | $16.90$12.68 | ||||
| Softwood/Hardwood | 29.5 x 12 x 1.5mm Straight Edge | - | Amana Tool SRK-30 Solid Carbide 4 Cutting Edges Insert Replacement Knife for Soft/Hardwood 29.5 x 12 x 1.5mmMore info | Amana Tool | SRK-30 | $14.35$10.76 | ||||
| MDF, Chipboard, Solid Surface | 29.5 x 12 x 1.5mm Straight Edge | - | Amana Tool HRK-30 Solid Carbide 4 Cutting Edges Insert Replacement Knife for MDF, Chipboard, Solid Surface 29.5 x 12 x 1.5mmMore info | Amana Tool | HRK-30 | $17.60$13.20 |
*Diamond-Like Carbon (DLC) is a nanocomposite coating that has unique properties of natural diamond low friction, high hardness and high corrosion resistance.
Re-Ordering Torx® Screw and Torx® Key List
Included Torx® Screw
Included Torx® Key
5005
Ingenious rabbeting bits that will enable rabbet cuts from flush through 3/4" in 1/16" increments, and five undersized plywood sizes, using optional collars. Particularly useful when working with large stock, or when a precise rabbet depth is required (ie. 23/32 depth for plywood). There are 18 different rabbet sizes available between the standard and optional collars. The basic tools (#49360 & RC-49360) are supplied with a 2" diameter rabbet bit, hex key, instructions and all necessary parts for 5/8" and 3/4" depth rabbets.
The "RC" version has extra-long double-edged carbide inserts which enables the bit to cut 30mm high. Inserts can be rotated or replaced without removing the bit from the router.
The "RC" version has extra-long double-edged carbide inserts which enables the bit to cut 30mm high. Inserts can be rotated or replaced without removing the bit from the router.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.