Amana Tool RC-1000 Insert Solid Carbide Flush Trim 3/4 D x 15/32 CH x 1/4 Inch SHK w/ Lower Ball Bearing Router Bit

Amana Tool® Item #RC-1000
$114.65
$85.99
Free shipping on orders $49 and up

Replacement Insert Knives

*Sort the Table by clicking on the Column Heading
TypeDimensionsDescriptionBrandTool NoOur PriceWish ListReady To Buy
MDF, Chipboard, Solid Surface12 x 12 x 1.5mmStraight EdgeAmana Tool
Amana Tool HMA-12 Solid Carbide 4 Cutting Edges Insert Replacement Knife for MDF, Chipboard, Solid Surface 12 x 12 x 1.5mmMore infoHMA-12$6.90$5.18
Qty:
General Purpose Wood, Chipboard, Plywood12 x 12 x 1.5mm Straight EdgeAmana Tool
Amana Tool AMA-12 Solid Carbide 4 Cutting Edges Insert Replacement Knife for General Purpose Wood, Chipboard, Plywood 12 x 12 x 1.5mmMore infoAMA-12$5.50$4.13
Qty:
Solid Wood12 x 12 x 1.5mm DLC Coated* Straight EdgeAmana Tool
Amana Tool AMA-12-DLC Solid Carbide 4 Cutting Edges Diamond-Like Carbon (DLC) Coated Insert Knife for Solid Wood 12 x 12 x 1.5mmMore infoAMA-12-DLC$9.20$6.90
Qty:
Softwood/Hardwood12 x 12 x 1.5mm Straight EdgeAmana Tool
Amana Tool SMA-12 Solid Carbide 4 Cutting Edges Insert Replacement Knife for Softwood/Hardwood 12 x 12 x 1.5mmMore infoSMA-12$8.35$6.26
Qty:
Micro-Finish General Purpose12 x 12 x 1.5mmStraight EdgeAmana Tool
Amana Tool MFA-12 Solid Carbide 4 Cutting Edges Insert Replacement Knife for Micro-Finish General Purpose 12 x 12 x 1.5mmMore infoMFA-12$10.45$7.84
Qty:

*Diamond-Like Carbon (DLC) is a nanocomposite coating that has unique properties of natural diamond low friction, high hardness and high corrosion resistance.

Re-Ordering Screw and Torx® Key List

Included Knife Screw
Included Bearing Screw
Included Torx® Key

67115

RC-1000 use 67137

RC-1004 use 67115

RC-1006, RC-1007 use 67176

5005

Re-Ordering Dust Shield and Hex Key for Bearing List

Included Dust Shield
Included Hex Key for Bearing

RC-1000, RC-1004 use 67116

RC-1000 use 5007

RC-1004 use 5005

Each throw-away knife in this flush trimming bit has multiple edges. Rotate the knife to expose a fresh cutting edge.

  • Reduce downtime to a minimum!
  • Insert knives can be replaced at any time, even mid-job, without changing the router setup.
  • Industrial quality.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Up Copyright © 2022 Toolstoday. All rights reserved.