Amana Tool 46094-K SC Spektra Extreme Tool Life Coated Spiral 1/4 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long Composite, Fiberglass & Phenolic Cutting Up-Cut Router Bit

Amana Tool® Item #46094-K
$53.50
$40.13
Free shipping on orders $49 and up


vectric fusion 360 tool file toolstoday


vectric fusion 360 tool file toolstoday

Amana Tool®’s Modern Materials Finishing Geometry (MMFG) incorporates high shear, multi-fluting and Spektra Extreme Tool Life Coating designed for the ultimate combination of finish and tool longevity in aerospace materials. Modern-day materials present challenges to the fabricator, using Amana Tool’s special, multi-flute edge tool featuring Spektra™ coating, addresses these challenges with a winning geometry combination.

Excellent for cutting:

  • Plastic
  • Acrylic Stone
  • Aluminum
  • Acrylonitrile-Butadiene-Styrene (ABS)
  • Carbon Fiber Reinforced Polymer (CFRP)
  • Coroplast®*
  • Corian
  • Fiberglass
  • Fiberglass PCB Board
  • HDPE
  • High Impact Polystyrene (HIPS)
  • Polycarbonate (Lexan™)
  • Low Density Polyethylene (LDPE)
  • Phenolics
  • Poly (methyl methacrylate) (PMMA)
  • Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
  • Thermoplastic Polyolefin (TPO)

*Coroplast® is soft plastic cardboard made with super soft, super flexible PVC.

Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan™

Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant, distinctively-tinted coloring, nACo provides additional improvements in four critical aspects of router tooling.

  • nACo coating is an micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
  • Coatings prevents high heat and oxidation which is detrimental to cutting tool performance.
  • Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
  • nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.

Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Up Copyright © 2022 Toolstoday. All rights reserved.