Amana Tool AMS-151 8-Pc V-Groove for Double Edge Folding Aluminum Composite Material (ACM) Panels Router Bit Collection, 1/4 Inch Shank

Amana Tool® Item #AMS-151
$393.10
$294.83
Free shipping on orders $49 and up

Set #AMS-151 Includes the Following 1/4" Shank Tools:

Tool No
Description
Product Page
45792
Carbide Tipped V-Groove 90 Deg. x 0.090 Tip Cut Width x 3/8 CH x 1/2 D x Router Bit
45795
Carbide Tipped V-Groove 108 Deg. x 0.090 Tip Cut Width x 3/8 CH x 1/2 D x Router Bit
45798
Carbide Tipped V-Groove 135 Deg. x 0.078 Tip Cut Width x 1/2 CH x 3/4 D Router Bit
45745
ZrN Coated Carbide Brazed to Steel Shank V-Groove 90 Deg. x 0.090 Tip Cut Width x 3/8 CH x 1/2 D
45762
AlTiN Coated Solid Carbide V-Groove 90 Deg. x 0.090 Tip Cut Width x 3/8 CH x 1/2 D Router Bit
RC-45716
Solid Carbide Insert V-Groove 90 Deg. x 0.090 Tip Cut Width x 43/64 D Router Bit
51402
Solid Carbide Spiral 'O' Single Flute 1/4 D x 5/8 CH Up-Cut Router Bit with Mirror Finish
51502
Solid Carbide Spiral 'O' Single Flute 1/4 D x 5/8 CH x 1/4 SHK Down-Cut Router Bit with Mirror Finish

Designed for shaping Aluminum Composite (sandwich) Materials (ACM) with flat bottom V-grooves. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding/creasing the remaining material by hand. Ideal for wall panel fabrication.

Cost of 8 Bits
Purchased Individually
$408.82
Set Selling Price$294.83
Buying the Set you Save28%

ACM is widely used for cladding many diverse exterior and interior applications such as office buildings, hospitals, convention centers, airports, and hotels. The long lasting durability of the material makes it an excellent choice for buildings, signage, displays, etc.
 



Designed for cutting and scoring aluminum sandwich materials including:

  • Aluminum, Clay, Zinc & Wood Composite Panels
  • Aluminum Composite Materials (ACM)
  • Aluminum Composite Panel (ACP)*
  • ALPOLIC® Copper Composite Material (CCM)
  • Alucobond®
  • Alupanel®
  • Dibond®
  • Durabond**
  • e-panel™
  • Etalbond®
  • Phenolics
  • Plastic/Acrylic
  • Plexiglas®
  • Titanium Composite Material (TCM)
  • Wood

*Aluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminum sheets bonded to a non-aluminum core. ACPs are frequently used for external cladding or facades of buildings, insulation, and signage.

**Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration.

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Copyright © 2020 Toolstoday. All rights reserved.