Amana Tool BURS-102NF Cylindrical Shape SC Head 3/8 D x 3/4 CH x 1/4 SHK x 2-1/2 Inch Long ZrN Coated Double Cut SA Burr Bit

Amana Tool® Item #BURS-102NF
$30.70
$23.03
Free shipping on orders $49 and up

For Die-Grinders

Benefits of the DC flute include rapid removal of a broad range of materials combined with excellent operator control. It does this by incorporating a positive cutting rake angle that gives great “bite” into the material and yet,­­­ is not so aggressive that the operator fatigues quickly after using it in a hand piece. The steel shanks are ground, which sets them apart from our competitors. The solder joints are clean, with no excess solder gaping out from the sides between the carbide bud and the shank

Non Ferrous (NF) burrs are specially designed for cutting all non-ferrous and non-metallic workpieces such as aluminum, zinc, plastic, wood, etc. The uniquely aggressive cutting action provides little to no chance of plugging the flutes.

Applications: To be used with air or electrically driven hand die-grinder with a typical collet mechanism or knee mill with an air-driven spindle speeder such as an Air Turbine product. Use of a quality spindle speeder may greatly improve performance of miniature tooling.

WARNING!: Not to be used in conventional Routers

For use with:

  • Aluminum
  • Brass
  • Bronze
  • Copper
  • Plastic
  • Wood

Benefits of ZrN Coating:

  • Creates a harder and tougher cutting edge
  • Allows for a prolonged cutting edge life
  • Helps to prevent the build-up of material in the flutes while cutting

More sizes, shapes & types available upon request.

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Copyright © 2020 Toolstoday. All rights reserved.