Amana Tool 45749 V-Groove 108 Deg. Folding for Steel Composite Material (SCM) Panels, 0.090 Tip Cut Width x 3/8 CH x 1/2 D x 1/4 Inch SHK Carbide Tipped Router Bit with AlTiN Coating
Amana Tool® Item #45749
$87.35
$65.51
Free shipping on orders $49 and up
| a° a° Degree | a1° | D Diameter | D1 | B Cutting Height | B1 | d Shank | L Overall Length | Flute | Surface Coating |
|---|---|---|---|---|---|---|---|---|---|
| 108° | 36° | 1/2 | 0.090 | 3/8 | 5/32 | 1/4 | 2-1/8 | 2 | AlTiN |
The Aluminum Titanium Nitride (AlTiN) coated cutting tip combined along with special Amana-grade carbide provides much longer tool life especially compared to carbide tipped tooling.
For Scoring Steel Composite Materials Including:
• Steel Composite Material (SCM)
• Titanium Composite Material (TCM)
Specially designed router bits are used to route V-grooves in the above materials to allow easy bending without cracking the bent area. Route within 0.8mm from the bottom of the composite panel to achieve a clean bend/radius. Routing V-shaped grooves, whereby the steel cover and a part of the polyethylene core is removed, allows folding the remaining material by hand. Ideal for wall panel fabrication.
AlTiN Coating Benefits:
- Extra wear resistance
- Allows for faster feed and speed rates
- Cutting edge protected from wear
- Better chip evacuation
- Less heat build up
- Superior cutting quality and extended tool life
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
