Carbide Tipped • 2 Flute Amana Tool® industrial carbide tipped laminate trim bits with the Euro™ Square Bearings. The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut.
SQB100 Can be mounted to any 1/2" diameter Amana Tool flush trimmer. SQB102 Can be mounted to any 3/4" diameter Amana Tool flush trimmer.
Leaves no marks on high-gloss, finished edges
Use 1/2" diameter bit with laminate trimmers, use 3/4" diameter bit with routers
Glue won't stick to bearing
Beveled cutter means little or no hand filing
Will not scratch high gloss laminates
Beveled cutter can be resharpened
The square bearing is manufactured with a strong non-stick Teflon® which won't mark your edge so it can be wiped clean easily.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.