Amana Tool 47149 Laminate Trimmer with Euro TM Square Bearing 3/4 Dia x 5/8 Cut Height x 1/2 Inch Shank Carbide Tipped Router Bit
Carbide Tipped • 2 Flute
Amana Tool® industrial carbide tipped laminate trim bits with the Euro™ Square Bearings. The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut.
SQB100 Can be mounted to any 1/2" diameter Amana Tool flush trimmer.
SQB102 Can be mounted to any 3/4" diameter Amana Tool flush trimmer.
Amana Tool® industrial carbide tipped laminate trim bits with the Euro™ Square Bearings. The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut.
SQB100 Can be mounted to any 1/2" diameter Amana Tool flush trimmer.
SQB102 Can be mounted to any 3/4" diameter Amana Tool flush trimmer.
- Leaves no marks on high-gloss, finished edges
- Use 1/2" diameter bit with laminate trimmers, use 3/4" diameter bit with routers
- Glue won't stick to bearing
- Beveled cutter means little or no hand filing
- Will not scratch high gloss laminates
- Beveled cutter can be resharpened
The square bearing is manufactured with a strong non-stick Teflon® which won't mark your edge so it can be wiped clean easily.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
| D Diameter | B Cutting Height | d Shank | L Overall Length | Flute | Ball Bearing | Replacement Bearing |
|---|---|---|---|---|---|---|
| 3/4 | 5/8 | 1/2 | 2-5/8 | 2 | Lower | SQB102 |
Amana Tool® Item #47149
$36.05
$27.04
Free shipping on orders $49 and up
