These bits are designed for cutting base molding, chair, rail, door & window casing, cabinet molding and other millwork! Theprofile is laid out vertically, reducing the diameter of the bit. Thesebits should be used in a 2+ horsepower, table-mounted router, andshould be run at reduced speed. Although it has a ball-bearing guide,guiding the cuts with the fence is recommended.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.