Warning:
Before using any insert tool, make sure the set screw is tightened firmly. When replacing a dull insert, first clean the tool and remove all dust prior to inserting the new knife.
AMS-179 CNC Router Bit 8-Pc Advanced Starter Set, 1/4 Inch Shank
Amana Tool® Item #AMS-179
$598.10
$448.58
Free shipping on orders $49 and up
*ATTENTION: Item #RC-1142, when using on small, hobby type CNC machines, set RPM to 12,000 rpm with 30% slower feed rate.
Solid Carbide Spektra™ Extreme Tool Life Coated and Insert Carbide CNC Router Bits.
Designed for the most demanding signmaking tasks. These router bits are excellent for creating signs and other CNC projects in a variety of materials. Each router bit is manufactured from Amana's exclusive grade carbide according to stringent quality standards.
| Cost of 8 bits Purchased Individually | $598.10 |
| Set Selling Price | $448.58 |
| Buying the Set you Save | 25% |
Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance to the router bit. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
- nACo coating is an micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- Coatings prevents high heat and oxidation which is detrimental to cutting tool performance.
- Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
- nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.
Note: Blue based color dissipates immediately upon use. nACo® nanocomposite coating will not wear off.
The innovative CNC insert tool design uses a high grade solid carbide insert knife which allows you to get two uses out of each insert. Once insert knife show signs of wear you can rotate the insert for a brand new cutting edge. The secure locking screw system ensures maximum safety and maintains cutting accuracy. The V Groove router bit in this set comes complete with solid carbide insert knife/knives designed for general purpose use. The mini insert spoilboard, surfacing, rabbeting, flycutter, leveler and bed skimming router bit comes complete with two carbide insert knives designed for cutting MDF.
Stored in a solid wood showcase storage box with a Plexiglas® clear lid.
Wood Storage Box Dimensions: 12" L x 6" W x 3" H
Excellent for Cutting:
- Carbon Fiber
- Laminate
- Melamine
- MDF
- Plastic/Acrylic
- Solid Surface
- Veneered Plywood
- Wood
Set #AMS-179 Includes the Following Tools:
Tool No
Description
Product Page
46202-K
Solid Carbide Spektra™ Extreme Tool Life Coated Spiral Flute Plunge, Downcut 1/4 Dia x 3/4 CH x 1/4 Inch Shank Router Bit
46170-K
CNC Solid Carbide Spektra™ Extreme Tool Life Coated Compression Spiral 1/4 Dia x 7/8 CH x 1/4 Inch Shank Router Bit
45771-K
30° Solid Carbide Spektra™ Coated Engraving 0.440" Cut Height x 1/4" Shank Router Bit
RC-1145
CNC Insert V-Groove 45° x 13/16" Dia x 63/64" Cut Height x 1/4" Inch Shank Router Bit
46282-K
CNC Solid Carbide 2D and 3D Carving 5.4° Tapered Angle Ball Tip x 1/16" Dia x 1/32" Radius x 1" Cut Height x 1/4" Shank x 3" Long x 4 Flute Spektra™ Coated Router Bit
RC-1148
CNC Insert V-Groove 60° x 1-1/16" Dia x 59/64" Cut Height x 1/4" Inch Shank Router Bit
RC-1142*
CNC Insert V-Groove 90° x 3/4" Dia x 3/4" Cut Height x 1/4" Inch Shank Router Bit
RC-2248
Mini Insert Spoilboard Surfacing, Rabbeting, Flycutter, Slab Leveler & Surface Planer 1-1/2" Dia x 12mm Cut Height x 1/4 Inch Shank Router Bit
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.