Carbide Tipped Saw Blade System • 2.0-3.0mm Flat Bottom
Set contains two carbide tipped saw blades and a shim set designed for scoring angled cuts with flat bottoms in aluminum/plastic composite materials like ACM, Copper Composite Materials (CCM), Titanium Composite Materials (TCM), Alucobond®, Alupanel®, Dibond®, ALPOLIC®, Trespa®, etc.
These blades are widely used for scoring many cladding materials (wall coverings) and applications such as office buildings, hospitals, convention centers, airports, hotels. Cutting V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand.
For 60°, 90°, 108°‚ & 135° Folds
5/8" and 1" bore available
For use in table saw only.
WARNING!: Never attempt to cut ferrous metals with these blades. Clamp down the work piece.For optimal results and extended saw blade sharpness use blade wax, mist lubricant system or air cooling.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.