CNC Project Video: 3D Carving Motorcycle Model | ToolsToday®

© 2021 ToolsToday

For Your Safety

  1. The methods illustrated here are only intended for use with a CNC machine.
  2. Make certain that the workpiece is secured and that all components of the fixture are securely fastened to the table.
  3. Use a guard, eye and hearing protection at all times.

Hand drawn motorcycle by Pierre-Luc Arseneau from turned into CNC art using ArtCam and Amana Tool® Router bits on a General® iCarver CNC machine.

Sketching the concept with a pencil, the talented Pierre-Luc Arseneau draws his motorcycle concepts on paper. The attention to detail he puts into the drawing and tracing of his vectors is remarkable, and the finished piece of art shows it!

Pierre scans his finished motorcycle drawing, imports the file into Corel Draw and begins to trace his artwork by creating the vectors. ArtCam is used to create and simulate the tool paths. Now that the digital file is prepared for cutting, he transfers the file to a portable USB drive and inserts the drive into his CNC machine. Pierre will insert his tools and center his X, Y and Z axis before making his initial cut on his General® iCarver CNC machine.

Feed, Speed & Step Down Technical Information:

1/4" Dia. Solid Carbide Spiral Flute Plunge CNC Router Bit  #46415
Feed Rate (IPM): 120
Speed (RPM): 21,000
Chip Load (Per Tooth): 0.003"
Step Down (Per Pass): 0.250"

1/16" Dia Solid Carbide Spiral Ball Nose 3D Carving CNC ZrN Coated Up Cut Router Bit  #46282
Feed Rate (IPM): 125
Speed (RPM): 21,000
Chip Load (Per Tooth): 0.002"
Step Down (Per Pass): 0.039"

3D Carved Motorcycle CNC video designed by ToolsToday® and Pierre-Luc Arseneau.

Purchase the digital file for 3D wood carved Motorcycle Here.

Amana Tool
Pierre-Luc Arseneau

View most recent videos:

Copyright © 2021 Toolstoday. All rights reserved.