Stepcraft MM-1000 Di Digital Milling Spindle For D-Series And M-Series

STEPCRAFT Item #11648
Estimated ship time is 3-9 business days

*Coupon codes are not applicable for this item

*Ships direct from manufacturer, Shipping fees may apply

The MM-1000 DI is the newest line of spindles that we offer for our D-Series CNC Systems.  The spindle is made in Germany under strict quality control and is designed to perform reliably for long periods of time. Unlike a typical router, such as the Dewalt DW611, the MM-1000 DI is a true CNC milling spindle with the use of precision bearings that are designed for very long runtime with maximum concentricity. A labyrinth seal is used to protect the spindle and bearings against dust and debris.  Unlike our popular MM-1000 Milling Spindle, the new "DI" version includes a digital interface so you can control the RPM of the spindle via UCCNC and your g-code programs. It also has a manual dial on it to override the digital settings should you need to do so.  It has a sound level of only 71 dB which means lower noise in your shop. 


  • Input Voltage (AC): 110V

  • Rotary Speed: 4,000-25,000 rpm

  • Output Power: 1000 watts (1.4 hp)

  • Quiet design: 71 dB

  • Digital electronics with constant speed under load, soft start-up, idle speed reduction and overload protection

  • Concentricity (shaft): <0.01 mm

  • Concentricity (end mill): <0.05 mm 

  • Labyrinth seal to protect spindle bearing against foreign particles

  • External gantry interface

  • For wood, metal, plastics, foam, polystyrene, stone

  • Weight: 3.6 lbs.


  • Milling Motor MM-1000 DI

  • 1/8" Collet

  • Spanner wrench

  • Sensor Cable

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust
Up Copyright © 2023 Toolstoday. All rights reserved.