Ripping Standard Saw Blades
610240 is non-coated
610240C coated with Electro-Blu™ Non-Stick Coating
#612300-70 and #614300-70 are for SCM machines with two keyways (20mm centers x 5mm Dia)
#MD10-240UTB = Ultra Thin Blade
P.H. denotes pin-hole configuration, if applicable. Example: 2/10/60 = 2 @ 10mm dia. on a 60mm circle.
#610200-30 is replaced by #MD10-240-30
#614300-30 is replaced by #614300
#RB2044 is replaced by #620360
#MD10-240UTB is replaced by #MD10-240TB
This blade is the classic ripper for both hardwood and softwood. It features the flat-top grind for cutting with the grain efficiently; ample gullets for fast chip-clearance; expansion slots and turbulence-reducing copper plugs. Available in 18° and 20° hook configurations. The blade with the 20° hook angle features a thicker plate and cuts a wider kerf. Use in single and gang-rip saws.
Please note #610301C is coated with Electro-Blu™ Non-Stick Coating.
- FT Flat Top Grind
- Clean rip cuts in solid wood
Safety Guidelines for Saw Blades.