The new Chameleon LED Lathe light with 95 CRI is optimized for the best possible lighting. With the LED benefits of long life, low power consumption, and low heat emission; the Laguna LED line are the best machine lamps available.
The light will mount to 14|12, 14BX, 18BX, 18CX, Revo 12, Revo 15, Revo 18, Revo 24, JX|12 ShearTec: II Jointer without brackets or accessories.
Features:
- Chameleon Color (Temperature) Control
- Brightness Control
- Casted Impact Resistant Heads
- Shadow Diffusing Lens
80, 90, 95 CRI are color rendering indexes – This index is used to compare artificial light sources to that of natural light that we perceive through our eyes on a sunny clear day. The higher the CRI, the more real things will look when shined upon.The out new Chameleon LED lights with 90 CRI (ALEDMACH) and 95 CRI (ALEDLATHE) for the best possible lighting. With the Led benefits of long life, low power consumption, and low heat emission; this makes the Laguna LED line the best machine lamp available. Chameleon Color (Temperature) Control allows the user to tune the environment with the best lighting possible. Poor lighting in a workspace can distort colors, reflect poorly, and cause shadows that make the details fade. The Chameleon Color control is technology taken down from surgeons and doctors that we thought would be very useful for the makers. Full Brightness Control works in unison with the Chameleon color control allowing the user to further tune the lighting environment.
Casted Impact-resistant heads – The heads are water and dust resistant and can withstand a punch well enough for military standards.
Shadow Diffusing Lens makes the shadows less crisp and noticeable – An undiffused light will cast a shadow with crisp lines, adding distractions. The diffusing lenses give more natural and pleasing light.
Multiple Joint Design – Solid joints are used to allow the user to move the light wherever it needs to be. These joints can easily be tightened and loosened as desired and are prepped with Loctite prior to shipping.
50,000-hour service life (5.7 Years) – This means you can turn the light on, and leave it on, for 5.7 years before the bulb dies. This is because LED technology is very efficient, will not get hot, and uses very little electricity to operate. 100-240V LED Driver, 110V plug included. Another crucial component to the longevity of the light is the driver. Our drivers allow for a voltage input anywhere from 100V to 240V and are equipped standard with a 110V 5-15 plug. This means that if you need 208V or 220V you can simply cut the plug and rewire it to the receptacle.
Low Heat & Energy Consumption – Based on recent electricity data, the 14W Chameleon lights will only cost $2.56 a year if used for 5 hours every day. Compare this to a typical Halogen Machine light, the cost is up to ten times that, and that is not included replacement bulbs or possible fire hazards.
Detailed Specs
- Bulb Wattage: 14 Watt
- Bulb Angle: 120
- Illuminance*: 0-720
- Temperature: 3000K-6000K
- Color Rendering Index (CRI): 95 CRI (best)
- Service Life: 50000
- Controls: Illuminance, Temperature, Power
- Assembled Dimensions: W4 x L28 x H26
* Measurement taken at full brightness from 1 meter from light source. For refernce, an iphone X LED light was measured at 49.8 lumens
Electrical
- 110 or 220 volt with built-in driver
- Pre-wired for 110 volt
- Plug change required for 220 volt (220 plug not included)
Uses:
- Illuminating detailed carving work on wood
- Enhancing visibility for precision joinery tasks
- Providing light for sanding and finishing operations
- Assisting in the setup and adjustment of woodworking machinery
- Lighting up workbench areas for general woodworking tasks
- Improving accuracy during woodturning on a lathe
- Facilitating the inspection of wood surfaces for defects or imperfections
- Supporting intricate inlay work with better visibility
- Aiding in the assembly of complex woodworking projects
- Enhancing safety by reducing shadows and improving visibility around power tools
LED Chameleon Lathe Lamp | Laguna Accessories
Explore Laguna's Chameleon LED Machine Light Series | Lathe And Bandsaw
How To Convert Laguna LED Light Plug From 110V To 220V
