ALL
RCK-70 (4) 14 x 14 x 2mm
61340, 61343:
AMA-17 (4) 7.5 x 12 x 1.5mm
61342:
AMA-19 (4) 11.6 x 12 x 1.5mm
Insert Adjustable Grooving Cutter with Scorer and Ring Nut 8-24mm Kerf
*Sort the Table by clicking on the Column Heading
| D | B | d | Hex Screw | Repl. Torx® Screw | Replacement Knives | RPM | t | Teeth | Brand | Tool No | Our Price | Wish List | Ready To Buy | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 160mm | 8.0-15mm | 1-1/4 | 67113 | 67154 | RCK-70 (4), AMA-17 (4) | 4,800-8,300 | 30mm | 4+4 | Amana Tool 61340 Insert Carbide Adjustable Groove w/Scorer & Ring Nut 160mm D x 8.0 to 15.0mm CH x 1-1/4 Bore Shaper CutterMore info | Amana Tool | 61340 | $490.70$441.63 | ||||
| 160mm | 12.5-24mm | 1-1/4 | 67113 | 67154 | RCK-70 (4), AMA-19 (4) | 4,800-8,300 | 30mm | 4+4 | Amana Tool 61342 Insert Carbide Adjustable Groove w/Scorer & Ring Nut 160mm D x 12.5 to 24.0mm CH x 1-1/4 Bore Shaper CutterMore info | Amana Tool | 61342 | $489.95$440.96 | ||||
| 180mm | 8.0-15mm | 1-1/4 | 67113 | 67154 | RCK-70 (4), AMA-17 (4) | 4,800-7,500 | 40mm | 4+4 | Amana Tool 61343 Insert Carbide Adjustable Groove w/Scorer & Ring Nut 180mm D x 8.0 to 15.0mm CH x 1-1/4 Bore Shaper CutterMore info | Amana Tool | 61343 | $474.65$427.19 |
Note:
#61344 is replaced by #61343
Up
Copyright © 2023 Toolstoday. All rights reserved.
#61344 is replaced by #61343
Wedge (4) for #'s 61340, 61343, use #WB-12
Wedge (4) for #61342 use #WB-83
Included General Purpose
Solid Carbide Insert Knives
Solid Carbide Insert Knives
Optional *DLC Coated Insert Knives,
Optimal for cutting Solid Wood
Optimal for cutting Solid Wood
ALL
RCK-70-DLC (4) 14 x 14 x 2mm
Not available
Not available
†
*Diamond-Like Carbon (DLC) is a nanocomposite coating that has unique properties of natural diamond low friction, high hardness and high corrosion resistance.
Replacement Torx® Screw and Torx® Key ListTorx® Screw
Torx® Key
67154
5015
Fully adjustable in 1/10mm (.004") increments from 8.0 to 15mm or 12.5 to 24mm. Sizes are changed by simply unlocking and turning the adjusting collar, and then 'dialing-in' the desired width on the easy-to-read scale. All eight knives have four cutting edges each for long tool life and economy.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.