RCK-30 (4) 30 x 12 x 1.5mm
Insert Adjustable Grooving and Rabbeting Cutter with Scorer 20.6-100mm Kerf
*Sort the Table by clicking on the Column Heading
| D | B | d | Hex Screw | Repl. Torx® Screw | Replacement Knives | RPM | t | Teeth | Brand | Tool No | Our Price | Wish List | Ready To Buy | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 160mm | 20.6-40mm | 1-1/4 | 67142 | 67154 | RCK-70 (4), ICK-20 (4) | 4,800-8,000 | 40 | 4+4 | Amana Tool 61355 Insert Carbide Adjustable Groove & Rabbet w/Scorer 160mm D x 20.6 to 40mm CH x 1-1/4 Bore Shaper CutterMore info | Amana Tool | 61355 | $356.10$320.49 | ||||
| 160mm | 30.6-60mm | 1-1/4 | 67142 | 67154 | RCK-70 (4), RCK-30 (4) | 4,800-8,000 | 40 | 4+4 | Amana Tool 61356 Insert Carbide Adjustable Groove & Rabbet w/Scorer 160mm D x 30.6 to 60mm CH x 1-1/4 Bore Shaper CutterMore info | Amana Tool | 61356 | $424.85$382.37 | ||||
| 200mm | 20.6-40mm | 1-1/4 | 67142 | 67154 | RCK-70 (4), ICK-20 (4) | 4,000-6,500 | 50 | 4+4 | Amana Tool 61358 Insert Carbide Adjustable Groove & Rabbet w/Scorer 200mm D x 20.6 to 40mm CH x 1-1/4 Bore Shaper CutterMore info | Amana Tool | 61358 | $427.65$384.89 |
Note:
#61359 & #61361 are replaced by #61358
Re-Ordering Insert Knives List
Included Solid Carbide Insert Knives,
Optimal for cutting MDF
Optimal for cutting MDF
Included General Purpose
Solid Carbide Insert Knives
Solid Carbide Insert Knives
Optional *DLC Coated Insert Knives
Optimal for cutting Solid Wood
Optimal for cutting Solid Wood
ALL
RCK-70 (4) 14 x 14 x 2mm
61355, 61358:
ICK-20 (4) 20 x 12 x 1.5mm
61357:
ICK-50 (4) 50 x 12 x 1.5mm
61356:
RCK-30-DLC (4) 30 x 12 x 1.5mm
ALL
RCK-70-DLC (4) 14 x 14 x 2mm
*Diamond-Like Carbon (DLC) is a nanocomposite coating that has unique properties of natural diamond low friction, high hardness and high corrosion resistance.
Re-Ordering Torx® Screw and Torx® Key List
Included Torx® Screw
Included Torx® Key
67154
5015
Re-Ordering Hex Screw and Hex Key List
Included Hex Screw
Included Hex Key
67142
5020
Re-Ordering Spacer Set and Wedge List
Included Spacer Set
Included Wedge
61355, 61358:
66200
61356:
66202
61357:
66204
WB-31
WB-32
WB-33
Hard wearing steel body complete with tungsten carbide knives and scorer for improved finish. Suitable for producing various thickness grooves and rabbets in softwood, hardwood and man-made boards (with or without coating) on a spindle molder. Cutting width can be adjusted in 0.1mm steps by using supplied spacer rings.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.