Complete Dado Sets - Amana Tool

Priced From
$166.95
-
$299.66
Free shipping on orders $49 and up
SEE OPTIONS BELOW
*Sort the Table by clicking on the Column Heading
DTeethBorea° hookATB AngleGrindKerf RangeBrandTool NoOur PriceWish ListReady To Buy
6185/815°35°ATB/FT1/4 - 13/16
Amana Tool 656030 Carbide Tipped Dado 6 Inch D x 18T ATB/FT 10 Deg, 5/8 Bore, Dado SetMore infoAmana Tool656030$185.50$166.95
Qty:
8245/8-5°35°ATB/FT1/4 - 13/16
Amana Tool 658030 Carbide Tipped Dado 8 Inch D x 24T ATB/FT -5 Deg, 5/8 Bore, Dado SetMore infoAmana Tool658030$222.20$199.98
Qty:
8241-5°35°ATB/FT1/4 - 13/16
Amana Tool 658030-1 Carbide Tipped Dado 8 Inch D x 24T ATB/FT -5 Deg, 1 Inch Bore, Dado SetMore infoAmana Tool658030-1$222.20$199.98
Qty:
8465/8-5°35°ATB/FT1/4 - 13/16
Amana Tool 658040 Carbide Tipped Dado 8 Inch D x 46T ATB/FT -5 Deg, 5/8 Bore, Dado SetMore infoAmana Tool658040$266.60$239.94
Qty:
8461-5°35°ATB/FT1/4 - 13/16
Amana Tool 658040-1 Carbide Tipped Dado 8 Inch D x 46T ATB/FT -5 Deg, 1 Inch Bore, Dado SetMore infoAmana Tool658040-1$266.60$239.94
Qty:
10245/815°35°ATB/FT1/4 - 13/16
Amana Tool 651030 Carbide Tipped Dado 10 Inch D x 24T ATB/FT 10 Deg, 5/8 Bore, Dado SetMore infoAmana Tool651030$266.60$239.94
Qty:
1024115°35°ATB/FT1/4 - 13/16
Amana Tool 651030-1 Carbide Tipped Dado 10 Inch D x 24T ATB/FT 10 Deg, 1 Inch Bore, Dado SetMore infoAmana Tool651030-1$266.60$239.94
Qty:
1224115°35°ATB/FT1/4 - 13/16
Amana Tool 651230 Carbide Tipped Dado 12 Inch D x 24T ATB/FT 10 Deg, 1 Inch Bore, Dado SetMore infoAmana Tool651230$332.95$299.66
Qty:
Note: 'AK' denotes Anti-kickback design

Note: No Pin-holes for 30mm dado set #658040-30.


Carbide Tipped Dado Sets

1/4" to 13/16" Groove ATB and FT Grind
Dadoes (cross-grain cuts) and grooves (cuts with the grain) are cut efficiently on the table saw with a dado sack set. Unlike a "wobbler", a stack set produces a flat-bottom cut with chip-free edges. Amana Tool® makes dado stack sets for every machine and every type of woodworking material. The standard width capacity ranges from 1/4" to 13/16". The standard set, regardless of diameter or tooth count, consists of two outside saw blades and four inside chippers. The outside blades feature hollow ground plates for proper clearance, and alternate top bevel (ATB) grind with every sixth tooth flat ground (FT). See charts below for additional components. For plywood and melamine, the sets with 46-tooth outside blades are recommended

Perfect for Half Lap, Tenon, Dentil, Groove & Rabbet, Corner Lap, End Lap and Ship Lap (Shiplap) cuts. 

Dado Set Application: 
To cut groove and dados from 1/4" through 13/16" or larger than 13/16" with additional chippers. All 8" diameter sets have a 5? negative hook angle for smoother cuts.

Note: 10" and 12" dado sets do not include carry case, carry case shown is for 6" and 8" dado sets only. 
Note: No Pin-holes for 30mm dado set #658040-30.


saw blade guidelines for safetySafety Guidelines for Saw Blades.

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Copyright © 2020 Toolstoday. All rights reserved.