If you’re looking for the ultimate in tooling, you’ve found it! Amana Tool®'s PCD tipped 60° Engraving, V-Groove and Chamfering CNC router bits will engrave, groove and chamfer a wide variety of tough, abrasive materials including Carbon Fiber, Aluminum, MDF (both raw or with melamine), Plywood Veneer and hardwoods. The cutting edge lasts much longer than carbide for extremely long life.
CNC Polycrystalline Diamond (PCD) Engraving, V-Grooving and Chamfering Router Bits
Priced From
$196.52
Free shipping on orders $49 and up
$218.35
$196.52
BUY 5 OF THE SAME
SAVE 5%
Discount applied in your shopping cart
BUY 10 OF THE SAME
SAVE 10%
Discount applied in your shopping cart
*Sort the Table by clicking on the Column Heading
| a° | D | B | d | L | D1 | B1 | Flute | Max RPM | Brand | Tool No | Our Price | Wish List | Ready To Buy | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 60° | 1/4 | 1/8 | 1/4 | 2-3/8 | 0.005" | - | 2 | 24,000 |    | Amana Tool DRB-416 Polycrystalline Diamond (PCD) Tipped 60 Deg V Engraving/Chamfering 1/4 Dia x 1/8 Inch Cut Height x 1/4 Shank Router BitMore info | Amana Tool | DRB-416 | $218.35$196.52 | |||
| 90° | 1/2 | 3/8 | 1/4 | 2-1/4 | 0.004" | 1/4 | 1 | 24,000 |     | Amana Tool DRB-418 Polycrystalline Diamond (PCD) Tipped 90 Deg V Engraving/Chamfering 1/2 Dia x 3/8 Inch Cut Height x 1/4 Shank Router BitMore info | Amana Tool | DRB-418 | $218.35$196.52 |
PCD Tipped Solid Carbide Tool Body • Single and 2-Flute
Diamond is the hardest material on the earth. Polycrystalline Diamond (PCD) tooling is manufactured in a high-temperature and high-pressure laboratory that fuses diamond particles onto a carbide substrate, which allows the diamond to be brazed onto a tool body.
PCD Tooling Benefits:
- Harder cutting edge provides higher resistance to wear
- Cut thousands of feet more than carbide without changing tool, saving setup time
- Optimized machine tool efficiency
- Quality of finish is often significantly improved
Excellent for 'V' Grooving and Chamfering:
- Aluminum Composite Material (ACM)
- Carbon Fiber
- Composite Materials
- Hard Wood
- Laminated Chipboard and MDF
- Plywood Veneer
- Soft Wood
- Solid Surface
- Synthetic and Homogenous Marble
Excellent for Engraving:
- Aluminum Composite Material (ACM)
- Aluminum, Brass & Copper
- Aluminum Composites
- Carbon Fiber
- Coroplast®*
- Composite Materials
- Hard Wood
- HDPE
- King Starboard® / Marine Building Material
- Laminated Chipboard and MDF
- Metal Alloys that don't contain Iron
- PCB Board
- Phenolic
- Plastics
- Plywood Veneer
- Soft Wood
- Solid Surface
- Synthetic and Homogenous Marble
- Titanium
Warning: Maximum recommended material depth in one pass varies from 0.5mm - 3.0mm depending on the hardness of the material. The harder the material the less the depth.
*Coroplast® is soft plastic cardboard made with super soft, super flexible PVC.
Download DXF File
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
