Bullnose Radius Router Bits w/ Ball Bearing Guide
*Sort the Table by clicking on the Column Heading
Note:
Maximum RPM for #350-20 is 20,000
Note:
'M' denote thickness of material on which a full 180° roundover can be accomplished.
Note:
#51546 is replaced by #51569
Ball bearing is the same size as the small diameter of the tool and rides against the template for an exact duplication. Ideal for shaping stair treads, window sills, table and counter edges, shelves and making moldings. The “nose diameter” (M) is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.
- Very useful for template or pattern routing
- Industrial quality
- Carbide tipped
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.