Carbide Tipped Brad Point Boring Bits - 57mm Long - 10mm x 27mm Shank-Right Hand
#201003 is solid carbide.
Right hand tools rotate clockwise. Left hand tools rotate counter-clockwise.
#204017 is replaced by #201017
#201011 is replaced by #204011
Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away.
Amana's coating is applied onto the bit at a temperature of 570° F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.