2-Piece Stile & Rail Router Bit Sets - Bead 3/4 to 1 Inch Material
*Sort the Table by clicking on the Column Heading
| D | B | B1 | d | L | R | Flute | Type | # Wings | Ball Bearing | C | Replacement Bearing | Brand | Tool No | Our Price | Wish List | Ready To Buy | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1-5/8 | 1-1/16 | 1/4 | 1/2 | 3-5/16 | 3/16 | 2 | Bead Set | 2 | Yes | 3/8 | 47708 | Amana Tool | Amana Tool 55440 Carbide Tipped 2-Piece Stile and Rail 1-5/8 D x 1-1/16 CH x 3/16 R x 1/2 Inch SHK Router Bit SetMore info | 55440 | $248.25$186.19 |
Note: All 2-Piece stile and rail sets include two complete assemblies consisting of cutters, arbors, bearings, etc.
Also known as stile and post router bits.
2 Piece Stile and Rail Sets - BEAD - with Ball Bearing Guide for 3/4" - 1" Material
2-Wing
Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications. These sets are offered in two configurations, one for working material up to 1" thick, the other for material between 5/8" and 7/8" in thickness.
In addition to the components provided with sets of the first type, these sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.) Use in a table mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must be used.
2 Piece Stile and Rail Sets - BEAD - with Ball Bearing Guide for 3/4" - 1" Material
2-Wing
Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications. These sets are offered in two configurations, one for working material up to 1" thick, the other for material between 5/8" and 7/8" in thickness.
In addition to the components provided with sets of the first type, these sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.) Use in a table mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must be used.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.