CNC Walnut Catch All Tray USA | ToolsToday (4K)


© 2021 ToolsToday

For Your Safety

  1. The methods illustrated here are only intended for use with a CNC Machine.
  2. Make certain that the workpiece is secured and that all components of the fixture are securely fastened to the table.
  3. Use a guard, eye and hearing protection at all times.

Watch in 4K as Tyson Moore cuts into walnut to make this USA catch all tray using Amana Tool® CNC router bits.

Tyson engraved the United States map into the base of the tray with Amana’s 30° engraving Spektra™ coated solid carbide router bit no. 45771-K. He says “theses bit are super sharp, these walnut shavings are super soft and these bits are super colorful!”. Amana Tool Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant, distinctively-tinted coloring, nACo provides additional improvements in critical aspects of router tooling which results in extreme tool longevity and cuts of the highest quality.

ToolsToday provided product. Music: “Halation” by Evolv @artlist.io

Feed, Speed, Chip Load & Step Down CNC Running Parameters

Bowl & Tray 1/4” Radius Carbide Tipped Amana Tool Router Bit No. 45982
Feed Rate (IPM): 50 
Speed (RPM): 18,000 
Chip Load (Per Tooth): 0.001" 
Ramp Down: 25 IPM

Fine 30° Engraving with 0.005" Tip Width, Spektra™ Coated Solid Carbide Router Bit No. 45771-K
Feed Rate (IPM): 100 
Speed (RPM): 18,000 
Chip Load (Per Tooth): 0.003" 
Ramp Down: 50 IPM

1/4" Dia. Solid Carbide Spektra™ Coated Down-Cut Router Bit No. 46202-K
Feed Rate (IPM): 180 
Speed (RPM): 18,000 
Chip Load (Per Tooth): 0.005" 
Ramp Down: 90 IPM

View most recent videos:


Copyright © 2021 Toolstoday. All rights reserved.