Bullnose Radius Router Bits w/ Ball Bearing Guide - Economy

Priced From
Free shipping on orders $49 and up
*Sort the Table by clicking on the Column Heading
RDBdLFluteBall BearingReplacement BearingBrandTool NoOur PriceWish ListReady To Buy
Timberline 350-20 Carbide Tipped Bullnose 3/8 R x 1-3/8 D x 1-5/16 CH x 1/2 Inch SHK w/ Lower Ball Bearing Router BitMore infoTimberline350-20$92.10$64.47

Maximum RPM for #350-20 is 20,000

'M' denote thickness of material on which a full 180° roundover can be accomplished.

#51546 is replaced by #51569

Ball bearing is the same size as the small diameter of the tool and rides against the template for an exact duplication. Ideal for shaping stair treads, window sills, table and counter edges, shelves and making moldings. The “nose diameter” (M) is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.

  • Very useful for template or pattern routing
  • Industrial quality
  • Carbide tipped
Must be used with an edge guide on handheld routers or the fence on a router table.
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Copyright © 2021 Toolstoday. All rights reserved.