RC-2239, RC-2249, RC-2250 and RC-2253
Sides: HMA-12 (2) 12 x 12 x 1.5mm
Bottom: HCK-70 (2) 14 x 14 x 2mm
RC-2247
Sides: RCK-450 (2) 10.5 x 10.5 x 1.5mm
Bottom: RCK-452 (2) 10.5 x 10.5 x 1.5mm
MDF-Grade solid carbide insert knives included. Optional general purpose knives available below.
Mini insert spoilboard surfacing & rabbeting with scorers, great for cutting tight corners. Features unique 2+2 insert knife design that contains two cutting flutes and two up-shear scorers, which provide a smoother finish at the bottom of the cut than traditional two-knife style router bits. Engineered with an Amana-exclusive carbide grade for the highest quality of cut, maximum cutting efficiency, and faster material removal process. Also known as a Surface Planing, Rabbeting, Flycutter, Fly Cutter, Leveler and Bed Skimming Router Bit.
- Resurfacing spoilboards using CNC
- 2+2 spoilboards contain two bottom scorers for better performance, finer surface finish and better clearance for 90? corners
- Planing large glued up panels using CNC
- Surfacing and finishing wood using timber slab machines
- Also suitable for router sled machines, Make sure that your router sled is fully stable and squared.
- Rabbeting or slotting
Also suitable for router sled machines, Make sure that your router sled is fully stable and squared.
These industrial router bits come complete with four (4) MDF-Grade solid carbide insert knives, each with four (4) cutting edges that allow users to rotate the knife when one side becomes dull. Designed for spoil boarding, planing & rabbeting the following materials:
- MDF
- Fiberboard
- HDF/LDF
- High Density Urethane (HDU Board)
- Balsa Core*
- Plastic/Acrylic**
- Plywood/Chipboard*
- Solidwood/Softwood*
- Ultra-High-Molecular-Weight Polyethylene (UHMWPE)
*For optimal results and maximum insert life, replace inserts with optional general purpose knives #AMA-12 and #RCK-70 (sold separately).
**Use lower CNC spindle RPM and adjusted feed-rate to prevent Melting and adhesion of the acrylic material to the tool.
Max RPM = 24,000.
Recommendations: For surfacing solid woods it is recommended to remove both bottom scorers.
CNC Foam Board Cast Making for Concrete Coffee Table
Resurfacing Spoilboard for Your CNC Machine
Natural Art" Created using insert surfacing CNC router bit
Mini Insert spoilboard #RC-2250 In-Action!
Frog Table CNC Project using Spiral 'O' Flute Bits
View closeup images of CNC frog table project