How to Make a CNC Workbench | ToolsToday

© 2021 ToolsToday

This is a cool project to see come together from flat cut parts to a fully functional workbench and it looks incredible!

Check out the plans for this workbench

This project is intended to be cut on a CNC machine capable of working with full sheets of plywood, but with a few design adjustments can be cut on smaller CNC machines.

Watch our video on making this workbench without using our CNC machine

Tools Used in Video:
Amana Tool 55202 Carbide Tipped Countersink #6 Screw 3/8 D x 1/8 Drill D x 5/16 Round SHK

Amana Tool CO-120 7-8mm Collet for ER32 Nut

Amana Tool 45624-K SC Spektra Extreme Tool Life Coated V-Groove 60 Deg x 1/4 D x 31/64 CH x 1/4 Inch SHK 3-Flute Router Bit
RPM: 18,000
Feed Rate: 90ipm
Plunge Rate: 45ipm
Chip Load Per Tooth: 0.003"

Amana Tool 46172-K CNC SC Spektra™ Extreme Tool Life Coated Compression Spiral 3/8 D x 3/8 SHK Router Bit
RPM: 18,000
Feed Rate: 200ipm
Plunge Rate: 100ipm
Chip Load Per Tooth: 0.011"

Amana Tool 55227 3/8” Dia Carbide-Tipped Countersink with No Burning and Marring Adjustable Free Spinning, Low Friction Depth-Stop with No-Thrust Ball Bearing.

Amana Tool 47116 Carbide Tipped Flush Trim 1/2 D x 1/2 CH x 1/4 Inch SHK w/ Lower Ball Bearing 3-Flute Router Bit

Amana Tool 49504 Carbide Tipped Corner Rounding 1/4 R x 1 Inch D x 1/2 CH x 1/4 SHK w/ Lower Ball Bearing Router Bit


View most recent videos:

Copyright © 2021 Toolstoday. All rights reserved.