Amana Tool DT12841-30 Carbide Tipped Ditec Solid Surface 12 Inch D x 84T S-TCG, 0 Deg, 30MM Bore, Circular Saw Blade

Amana Tool® Item #DT12841-30
$343.05
$257.29
Free shipping on orders $49 and up
This solid surface saw blade features Amana Tool's Ditec 2000™ long lasting carbide teeth.
 
For cutting double-sided plastic laminate, Plexiglas® and solid-surface materials, such as Dupont®, Corian®, Wilsonart®, Gibraltor®, and SSV®, Fountainhead, etc. Suitable for table saws & radial arm and similar type machines due to 0° hook angle.

Carbide-Tipped.

Instructions for grinding:

• For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.

• Damaged teeth can be replaced, however, replacing of a large number of teeth will, of course, shorten the life of the saw blade.

• Since the carbide in the DITEC™ is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC™ carbide.

saw blade guidelines for safetySafety Guidelines for Saw Blades.

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Copyright © 2020 Toolstoday. All rights reserved.