McAfee Secure. Tested Daily

Planter/Flowerpot Built with 1/8" Dia. Compression & 90° V-Groove CNC Router Bits in Birch Plywood

© 2017 ToolsToday

For Your Safety

  1. The methods illustrated here are only intended for use with a CNC machine.
  2. Make certain that the workpiece is secured and that all components of the fixture are securely fastened to the table.
  3. Use a guard, eye and hearing protection at all times.


Watch as we create this plywood planter flowerpot, designed by Jordan Voukanski, from 1/2" Birch Plywood using Amana Tool Industrial Solid Carbide CNC 1/8" Dia. Compression Spiral Router Bit #46180 and Carbide Tipped 90° ‘V’ Groove CNC Router Bit #45751.

With the feed rate set at 120 IPM and the speed rate at 18,000 RPM (for both tools), the CNC compression spiral router bit cuts crisp, clean tree-like patterns from the 1/2" thick plywood. We then use the 'V' Groove bit to create the 90° cuts on all sides so each piece fits uniformly within each other. Glue is used to secure the Flowerpot together.

Flowerpot designed by Jordan Voukanski, interior and creative designer. Visit Jordan's website http://www.strictdesign.eu.

1/8" Dia. Solid Carbide Compression Spiral CNC Router Bit #46180 for Cutting Plywood, Laminate & MDF
Feed Rate (IPM): 120
Speed (RPM): 18,000
Step Down: 0.22"

90° 'V' Groove Carbide Tipped CNC Router Bit #45751 for Cutting 'V' Grooves in Plywood & Wood
Feed Rate (IPM): 120
Speed (RPM): 18,000
Step Down: 1/16"

Flowerpot Built with Solid Carbide 1/8" Dia. Compression & Carbide Tip 90° V-Groove CNC Router Bits, by ToolsToday.com.

 


View all tool videos:

minicart.loading