3-Pc Double Edge Folding V-Groove Router Bit Set for Aluminum Composite Material (ACM)
Carbide tipped double edge folding 'V’ groove & rectangular groove (for thicker walls) industrial router bits for shaping Aluminum Composite Materials (ACM) such as Alucobond®, Dibond® and other brands alike. Designed for scoring the following aluminum/plastic composite materials with 90°, 108°, 135° angles (with flat bottoms) and rectangular grooves:
- Aluminum, Clay, Zinc & Wood Composite Panels
- Aluminium Composite Materials (ACM)
- Aluminium Composite Panel (ACP)*
- ALPOLIC® Copper Composite Material (CCM)
- Titanium Composite Material (TCM)
Aluminum Composite Panel (ACP) is a type of ACM flat panel that consists of two thin aluminium sheets bonded to a non-aluminium core and is widely used as cladding for many diverse applications such as interior and exterior office buildings, external cladding or facades of buildings, hospitals, convention centers, airports, hotels, insulation and signage. **
Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration.
Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand.
Specially designed router bits are used to route V-grooves in the above materials to allow easy bending without cracking the bent area. Route within 0.8mm from the bottom of the composite panel to achieve a clean bend/radius. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand. Ideal for wall panel fabrication.
- For use on routers and CNC machines
- Industrial quality, carbide tipped
- ACM panels may be used both indoors and outdoors. Ideal for wall panel fabrication
- RPM: 18,000-24,000 (*Feed rate should be 120 inches per minute.)