Dynamically balanced saw blades ensures saw blade stability for a clean cut. Used on panel saws with separate scoring units for chip-free cuts on both sides of the material. With conical type scoring blades, the kerf width changes with depth of penetration. Used in combination with Amana Tool's® industrial saw blades '7' series only (#714721, etc.). Also used in combination with the new Amana Tool® Ditec 2000™ series panel saws. Kerf range should match the main blade. With longer lasting Ditec™ carbide tips.
Carbide-TippedInstructions for grinding:
• For maintenance grinding, use fine grit (D400 to D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.
• Damaged teeth can be replaced, however, replacing of a large number of teeth will, of course, shorten the life of the saw blade.
• Since the carbide in the DITEC™ is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the DITEC™ carbide.
Safety Guidelines for Saw Blades.
Note: #DT200T36-80A is replaced by #DT200T36-20A
Note: Please specify if your application requires 22mm, 30mm, 45mm bore, etc. Due to many different scoring machine sizes (particularly arbor sizes), it is advisable to measure both the scoring and main blades that are presently on your machine (diameter, bore, kerf, etc.).
