Ball bearing is the same size as the small diameter of the tool and rides against the template for an exact duplication. Ideal for shaping stair treads, window sills, table and counter edges, shelves and making moldings.
The “nose diameter” (M) is the thickness of stock that can be nosed, i.e., given a full 180-degree roundover. Flats at top and bottom of the cutting edges create fillets on stock thicker than the nose diameter.
- Very useful for template or pattern routing
- Industrial quality
- Carbide tipped
Must be used with an edge guide on handheld routers or the fence on a router table.
Note:
Maximum RPM for #350-20 is 20,000
Note:
'M' denote thickness of material on which a full 180° roundover can be accomplished.
Note:
#51546 is replaced by #51569
