2-Piece Stile & Rail Router Bit Sets - Concave - 3/4 Inch Material

Also known as stile and post router bits. 

Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications.

• For 3/4" material
• Use in a table mounted router

Bits in this set have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Re-spacing of the components should only be necessary -using the shims provided- after the cutters have been resharpened. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.