ALP : template_2column.master

Solid Carbide 2D and 3D Carving Tapered Ball Nose (Conical Ball) & Flat Bottom (End Mill), Zirconium Nitride (ZrN) Coated CNC Router Bit Sets

Solid Carbide 2D and 3D Carving Tapered Ball Nose (Conical Ball) & Flat Bottom (End Mill),  Zirconium Nitride (ZrN) Coated CNC Router Bit Sets
Show Picture 1Show Picture 2Show Picture 3Show Picture 4Show Picture 5Show Picture 6Show Picture 7Show Picture 8Show Picture 9Show Picture 10

Click here to view larger image

This product has been added to your shopping cart.
Ready to Buy? Free Shipping on orders $35 and up*

Price:
$96.53 - $297.75

Bookmark and Share

Up-Spiral Cutting Edge for Superior Chip Ejection
Amana Tool®'s Modern Materials Finishing Geometry (MMFG) incorporates high shear, multi-flute and a ZrN coating designed for the ultimate combination of finish and tool longevity in aerospace materials. Modern-day materials present challenges to the fabricator, using these special multi-flute edge tools featuring ZrN ceramic coating addresses these challenges with a winning geometry combination.

Specially designed for 2D and 3D CNC profiling and carving in plastic, aluminum, wood and more with machines such as "i-Carver", CarveWright™, CNC Shark®, ShopBot® and Datron. The high-shear ball nose tips cut smooth 2D and 3D contours with reduced stepping while the proprietary ZrN coating (applied by the physical vapor deposition coating process) provides high resistance to wear, sharper cutting edges, extended tool life and less friction & heat buildup.


Benefits of ZrN Coating:

  • Creates incredibly precise detail work
  • Optimized flute geometry and low Total Indicated Runout (TIR) guarantees clean cuts, essentially eliminates sanding and reduces chatter when used with low TIR spindles
  • Creates a harder and tougher cutting ceramic over carbide edge, allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting
  • PVD ceramic hardcoat designed for soft, gummy and abrasive materials
  • High aspect ratio for single pass deep-reach cutting
  • High flute volume supports high feed rates and chip loads. Has the ability to run and/or be spun much faster than uncoated tools
  • Flute geometry optimized for cutting sign foam, sign board, hardwoods, thermoplastics and phenolic composites


Applications:

  • Precision 2D and 3D large scale carving
  • Dimensional signage
  • 3D millwork
  • 2D and 3D contouring, profiling, modeling and pattern making for cabinetry, sign making, furniture making and jewelry mold making
  • Compatible with CarveWright™ and CompuCarve woodworking systems


For Cutting: HDU, Wood, PVC, Acrylic, Dibond®, MDF, HDF, Aluminum, Brass, Copper, Bronze, Graphite, Phenolic, Phenolic Composites, Plastic, Sign Board, Sign Foam, Composite, Fiberglass & Titanium.

For Use In: For CNC machines, Carving machines, handheld/portable routers and router tables. 

Up-Cut: Ejects chips up.

Choose Your Solid Carbide 2D and 3D Carving Tapered Ball Nose (Conical Ball) & Flat Bottom (End Mill), Zirconium Nitride (ZrN) Coated CNC Router Bit Sets

Description Shank Includes Tool #'s Brand Tool No. Our Price Ready to Buy?
8 Pc ZrN Coated Bit Set in Wood Box (Save 11%)8-Pc ZrN Coated Bit Set in Wood Box (Save 11%) 0.251/4 (see below for Tool #'s).(see below for Tool #'s). Amana ToolAmana Tool AMS-136 $397.00
$297.75
Quantity:  
4 Pc ZrN Coated Router Bit Set (Save 7%)4-Pc ZrN Coated Router Bit Set (Save 7%) 0.251/4 46284, 46288, 46290, 46292 (see below for D).46284, 46288, 46290, 46292 (see below for D). Amana ToolAmana Tool AMS-141 $193.95
$145.46
Quantity:  
3 Pc ZrN Coated Router Bit Set (Save 7%)3-Pc ZrN Coated Router Bit Set (Save 7%) 0.251/4 46282 1/16 D, 46284 1/8 D, 46294 1/4 D.46282 1/16 D, 46284 1/8 D, 46294 1/4 D. Amana ToolAmana Tool AMS-142 $178.20
$133.65
Quantity:  
3 Pc ZrN Coated Router Bit Set (Save 7%)3-Pc ZrN Coated Router Bit Set (Save 7%) 0.251/4 46280 1/32 D, 46282 1/16 D, 46286 1/8 D46280 1/32 D, 46282 1/16 D, 46286 1/8 D Amana ToolAmana Tool AMS-144 $165.59
$124.19
Quantity:  
3 Pc ZrN Coated Router Bit Set (Save 7%)3-Pc ZrN Coated Router Bit Set (Save 7%) 0.251/4 46290 1/16 D, 46292 1/8 D, 46294 1/4 D.46290 1/16 D, 46292 1/8 D, 46294 1/4 D. Amana ToolAmana Tool AMS-145 $128.72
$96.53
Quantity:  
3 Pc ZrN Coated Router Bit Set (Save 7%)3-Pc ZrN Coated Router Bit Set (Save 7%) 0.251/4 46282 1/16 D, 46286 1/8 D, 46294 1/4 D.46282 1/16 D, 46286 1/8 D, 46294 1/4 D. Amana ToolAmana Tool AMS-146 $169.52
$127.14
Quantity:  
4 Pc ZrN Coated Router Bit Set (Save 7%)4-Pc ZrN Coated Router Bit Set (Save 7%) 0.251/4 46280, 46282, 46286, 46294 (see below for D).46280, 46282, 46286, 46294 (see below for D). Amana ToolAmana Tool AMS-148 $222.79
$167.09
Quantity:  

Set #AMS-136 includes: 46280 (1/32), 46282 (1/16), 46284 (1/8), 46286 (1/8), 46288 (1/8), 46290 (Flat Botom 1/16), 46292 (Flat Botom 1/8) and 46294 (1/4 Dia)

Set #AMS-141 includes: 46284 (1/16), 46288 (1/8), 46290 (Flat Botom 1/16) & 46292 (Flat Botom 1/8 Dia.)

Set #AMS-148 includes: 46280 (1/32), 46282 (1/16), 46286 (1/8) & 46294 (1/4 Dia)

#AMS-136 Set, stored in solid wood showcase storage box with a Plexiglass® clear lid, includes the following:

Tool No
Description
Product Page
46280
1/32" Dia x 1" Cut Height x 6.2º Tapered Angle Ball Nose Tip x 1/4 Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46282
1/16" Dia x 1" Cut Height x 5.4º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
46284
1/8" Dia x 1-1/2" Cut Height x 1º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46286
1/8" Dia x 1" Cut Height x 3.6º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46288
1/8" Dia x 1/2" Cut Height x 7º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46290
1/16" Dia x 5/16" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46292
1/8" Dia x 1-3/32" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
46294
1/4" Dia x 1/2" Cut Height x 0.10° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit

 

#AMS-141 Set includes the following:

Tool No
Description
Product Page
46284
1/8" Dia x 1-1/2" Cut Height x 1º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46288
1/8" Dia x 1/2" Cut Height x 7º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46290
1/16" Dia x 5/16" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46292
1/8" Dia x 1-3/32" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit

 

#AMS-142 Set includes the following:

Tool No
Description
Product Page
46282
1/16" Dia x 1" Cut Height x 5.4º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
46284
1/8" Dia x 1-1/2" Cut Height x 1º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46294
1/4" Dia x 1/2" Cut Height x 0.10° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit

 

#AMS-144 Set includes the following:

Tool No
Description
Product Page
46280
1/32" Dia x 1" Cut Height x 6.2º Tapered Angle Ball Nose Tip x 1/4 Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46282
1/16" Dia x 1" Cut Height x 5.4º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
46286
1/8" Dia x 1" Cut Height x 3.6º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit

 

#AMS-145 Set includes the following:

Tool No
Description
Product Page
46290
1/16" Dia x 5/16" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46292
1/8" Dia x 1-3/32" Cut Height x 1/4" Shank Flat Bottom ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
46294
1/4" Dia x 1/2" Cut Height x 0.10° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit

 

#AMS-146 Set includes the following:

Tool No
Description
Product Page
46282
1/16" Dia x 1" Cut Height x 5.4º Tapered Angle Ball Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46286
1/8" Dia x 1" Cut Height x 3.6º Tapered Angle Ball Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46294
1/4" Dia x 1/2" Cut Height x 0.10° Tapered Angle Ball Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit

 

#AMS-148 Set includes the following:

Tool No
Description
Product Page
46280
1/32" Dia x 1" Cut Height x 6.2º Tapered Angle Ball Nose Tip x 1/4 Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46282
1/16" Dia x 1" Cut Height x 5.4º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 4-Flute Solid Carbide 2D and 3D Carving Router Bit
46286
1/8" Dia x 1" Cut Height x 3.6º Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 3-Flute Solid Carbide 2D and 3D Carving Router Bit
46294
1/4" Dia x 1/2" Cut Height x 0.10° Tapered Angle Ball Nose Tip x 1/4" Shank ZrN Coated 2-Flute Solid Carbide 2D and 3D Carving Router Bit

You May Also Want...

Product Reviews





Have A Question?

Do you have a quick question for us? Can't find what you're looking for? We'd love to help you out. Simply fill out the form below and we'll get back with you as soon as possible.

Please enter the verification code from the picture


Click here if you can't read the code
 
McAfee Secure. Tested Daily See Toolstoday.com Reviews at Bizrate.com We Accept, Visa, MasterCard, Amex, Discover, Google Checkout, and PayPal We Accept, Visa, MasterCard, Amex, Discover, Google Checkout, and PayPal Full Line Dealer of: Amana Tool
© 2014 Toolstoday. All rights reserved.
(!GWO_TRACKING_SCRIPT!)