Carbide tipped double edge folding 'V’ groove & rectangular groove (for thicker walls) industrial router bits for shaping Aluminum Composite Materials (ACM) such as Alucobond®, Dibond® and other brands alike. Designed for cutting the following aluminum/plastic sandwich materials with 90°, 108°, 135° angles (with flat bottoms) and rectangular grooves:
- Aluminum, Clay, Zinc & Wood Composite Panels
- Aluminium Composite Materials (ACM)
- Aluminium Composite Panel (ACP)*
- ALPOLIC® Copper Composite Material (CCM)
- Titanium Composite Material (TCM)
*Aluminum Composite Panel (ACP) is a type of ACM flat panel
that consists of two thin aluminium sheets bonded to a non-aluminium core and is widely used as cladding for many diverse applications such as interior and exterior office buildings, external cladding or facades of buildings, hospitals, convention centers, airports, hotels, insulation and signage. **
Durabond is a polyethylene core with 0.3mm colored aluminum sheet on either side, pre-finished requiring no decoration. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand. Ideal for wall panel fabrication.
Industrial quality carbide tipped ACM panel router bits, also known Dibond® composite router bits, Alucobond® composite router bits, Rectangular Groove router bits (for thicker walls), V folding Alucobond® router bits and V folding Dibond® router bits are very strong despite their overall lightweight and may be ordered any color or designed with patterns that imitate other materials, such as wood and marble, making them very popular.
Read our article: Routing Aluminum Composite Material (ACM) Panels Like Alucobond® and Dibond®
Specially designed router bits are used to route V-grooves in the above materials to allow easy bending without cracking the bent area. Route within 0.8mm from the bottom of the composite panel to achieve a clean bend/radius. Routing V-shaped grooves, whereby the aluminum cover and a part of the polyethylene core is removed, allows folding the remaining material by hand. Ideal for wall panel fabrication.
- Industrial quality, carbide tipped
- For use on routers and CNC machines
- ACM panels may be used both indoors and outdoors
- RPM: 18,000-24,000 (*Feed rate should be 120 inches per minute.)
* Includes insert knife #RCK-456 (4 flat sided)
|Replacement Insert Knives for RC-45716
Special Knives for
ACM materials & thin aluminum
||RCK-456 (4 sided with flat tips)