McAfee Secure. Tested Daily

Ultra-Glide™ High Performance Ball Bearing Guides

Ultra-Glide™ High Performance Ball Bearing Guides
This product has been added to your shopping cart.

Price:
$8.59 - $21.08


Ultra-Glide™ bearing assemblies feature satin-smooth Delrin® sleeves. Delrin® is an industrial synthetic plastic material similar to nylon, and will leave no marks on the material being cut. Applications include solid surface materials such as Gibraltor

Amana Tool® uses only the finest industrial quality precision ball bearings available. Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high-temperature grease is used for maximum life.


Ultra-Glide High Performance Ball Bearing Guide Assemblies


Ultra-Glide™ bearing assemblies feature satin-smooth Delrin® sleeves. Delrin® is an industrial synthetic plastic material similar to nylon, and will leave no marks on the material being cut. Applications include solid surface materials such as Gibraltor®, SSV®, Corian®, Surell®, and Fountainhead®, etc. Plexiglas® & other clear acrylics; and plastic laminates. Not recommended for regular wood applications due to a higher wear factor. Bearing # 47709, 47725, 47726, 47731, 47733 include Teflon® dust shields. These bearings provide a better seal to increase bearing life while routing materials that generate very fine dust particles (such as solid surface).


Note: Solvents should not be used to clean ball bearings, as this will deteriorate the special grease. 'Frozen' bearings (ones that do not rotate freely), should be replaced immediately.

Choose Your Ultra-Glide™ High Performance Ball Bearing Guides

D R B d D1 Taper Application Brand Tool No. image Our Price Ready to Buy?
D R B d D1 Taper Application Brand Tool No. image Our Price Ready to Buy?
0- 0.31255/16 0- 0- 0- 0- 0-0- 47727(set of 47727 & 47728) 0Amana Tool 47729 $24.40
$18.30
0- .500 (1/2).500 (1/2) 0- 0- 0.18753/16 0- 0-0- 1/2" diameter flush trim, corner rounds, etc.1/2" diameter flush trim, corner rounds, etc. 0Amana Tool 47707 $11.45
$8.59
0- .750 (3/4).750 (3/4) 0- 0- 0.251/4 0- 0-0- 21853247140, 57154 trim bits, and new style 57118, 57120 0Amana Tool 47709 $20.70
$15.53
0- 0.753/4 0.753/4 0- 0.251/4 0- 0- 5719257192 0Amana Tool 47768 $27.65
$20.74
0- 0.753/4 11 0- 0.251/4 0- 11 5719457194 0Amana Tool 47769 $27.65
$20.74
0- 0.753/4 0- 0.251/4 0.251/4 0- 010° 5717057170 0Amana Tool 47774 $20.70
$15.53
018° 0.812513/16 0- 0.218757/32 0.251/4 0- 0- 5726957269 0Amana Tool 47788 $15.45
$11.59
0- 0.8437527/32 0.51/2 0- 0.251/4 0- 0- 5719057190 0Amana Tool 47767 $27.65
$20.74
014° 0.85937555/64 0- 0.218757/32 0.251/4 0- 0- 5726857268 0Amana Tool 47785 $15.45
$11.59
0- .866 (7/8).866 (7/8) 0- 0- 0.251/4 0- 010° 57122New style 57122 and other ‘solid-surface’ type bit 0Amana Tool 47726 $25.70
$19.28
0- .866 (7/8).866 (7/8) 0- 0- 0.251/4 0- 010° 11432457156 through 57168 bowl bits only. 0Amana Tool 47731 $25.70
$19.28
010° 0.8757/8 0- 0.218757/32 0.251/4 0- 0- 5726757267 0Amana Tool 47787 $15.45
$11.59
0- 0.9062529/32 0- 0- 0.251/4 0- 0- 5715957159 0Amana Tool 47777 $15.10
$11.33
0- 0.937515/16 0- 0- 0.251/4 0- 021° 5716357163 0Amana Tool 47765 $27.65
$20.74
0- 0.95312561/64 0.3753/8 0- 0.251/4 0.6255/8 0- 5719157191 0Amana Tool 47766 $27.65
$20.74
0- .965 (31/32).965 (31/32) 0- 0- 0.251/4 0- 010° Old style 57122 bevel bit with 31/32" large dOld style 57122 bevel bit with 31/32" large d 0Amana Tool 47725 $25.70
$19.28
0- 11 0- 0- 0.251/4 0- 0 0New bowl bits. 0Amana Tool 47733 $20.15
$15.11
0- 11 0- 0- 0.251/4 0- 012° 11429057129 & 57161. 0Amana Tool 47732 $15.40
$11.55
0- 1.125 (1 1/8)1.125 (1-1/8) 0- 0- 0.59055118110236215mm 0- 0-0- New style 57138, 57140 (after 6/95). Old style useNew style 57138, 57140 (after 6/95). Old style use 0Amana Tool 47737 $28.10
$21.08
0- 1.1251-1/8 0- 0- 0.31255/16 0- 0-0- Slot cutter assemblies: 3/8" depth of cut; & 53610Slot cutter assemblies: 3/8" depth of cut; & 53610 0Amana Tool 47728 $13.30
$9.98
0- 1.382 (1 3/8)1.382 (1-3/8) 0- 0- 0.31255/16 0- 0-0- Slot cutter assemblies: 1/4" depth of cut; & 53610Slot cutter assemblies: 1/4" depth of cut; & 53610 0Amana Tool 47727 $12.90
$9.68

Product Reviews


minicart.loading