Cove with Ball Bearing Guide Router Bits
Use these cove bits to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. The other half is the corner-round.
- Large-diameter tools must be run at reduced speed.
- Bits with above 2" diameter are not guaranteed due extreme diameters.
- Use in hand-held or table-mounted routers.
For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish, and it will prolong tool life.
Choose Your Cove with Ball Bearing Guide Router Bits
#RC-49104 requires replacement knife #RCK-274 (2 required).
#49115 is replaced by #49116