2-Piece Stile & Rail Router Bit Sets - Bead 3/4 to 1 Inch Material

2 Piece Stile and Rail Sets - BEAD - with Ball Bearing Guide for 3/4" - 1" Material
2-Wing
Our stile and rail sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications. These sets are offered in two configurations, one for working material up to 1" thick, the other for material between 5/8" and 7/8" in thickness.

In addition to the components provided with sets of the first type, these sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.) Use in a table mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must be used.

Note: All 2-Piece stile and rail sets include two complete assemblies consisting of cutters, arbors, bearings, etc.