Saw Blades → Ditec 2000™ Super Long Lasting Saw Blades

• Exclusive DITEC 2000™ carbide tips
• Higher reliability and lower maintenance
• At least twice the output of conventional C-4 grade carbide
• Low noise level
• New laser cut saw bodies
• Excellent cutting quality
• Economically priced

DITEC 2000™ SAW BLADES

Resistance to abrasion is the single most important characteristic of the tungsten carbide used for saw teeth. The newly developed Ditec 2000™ carbide has greater hardness, with no loss of toughness, than any previous formulation. Using this carbide, Amana Tool® has produced a line of saw blades and other cutters that last two or three times longer than standard carbide formulations. In extensive testing, productivity increases ranging as high as 500% were recorded. The random tests were performed by outside firms running panel saws 2 or 3 shifts per day. Exceptionally sharp edges are ground and honed on the carbide tips with 400 and 600 grit diamond wheels. The surface quality of the saw teeth is second to none. The saw bodies are precision-cut using innovative laser technology. Each blade features expansion slots for great stability and low noise levels. Every saw blade is analyzed by an innovative and sophisticated computerized system to ensure faultless quality control. Runout tolerances are maintained at .002” or less. Instructions for grinding:

• For maintenance grinding, use fine grit (D400-D600) diamond wheels. To match the factory grind, use a slower than normal feed rate.

• Damaged teeth can be replaced by any grade of carbide tooth. Replacing of a large number of teeth will, of course, shorten the life of the saw blade.

• Since the carbide in the DITEC 2000™ is harder than other carbides, it is critical that you protect them from “thermal shock” if an adjacent tooth is replaced. Heat absorbed during the brazing process will seriously degrade the Ditec 2000™ carbide.

Ditec 2000™ Adjustable Type Scoring Sets Ditec 2000™ Conical Type Scoring Sets Ditec 2000™ Cut-Off and Crosscut Saw Blades Ditec 2000™ Panel Saw Blades - ATB Grind Ditec 2000™ Panel Saw Blades - TC Grind Ditec 2000™ Sliding Table Saw Blades DITEC™ Melamine Saw Blades Solid Surface Saw Blades w/ Ditec 2000™ Carbide Teeth

Application: All a° hook: All0° 10° 12° 18° 8° Bore: All1 100MM 1-1/4 20MM 22MM 30MM 45 3PH 45MM 5/8 50 3PH 50MM 55 3PH 55MM 60MM 65 2PH 75MM 80MM Brand: AllAmana Tool D diam inch: All– 10 12 14 8 D diam mm: All100 100MM 120 120MM 125 150 160 175 180 200 215 220 250 300 305 350 355 380 400 420 430 450 470 500 550 600 Grind: AllATB CONICAL H-ATB S-TCG TCG Material: AllCabinet Plywood Rip/Crosscut Melamine Single & Double Sided Panel Sizing Multi Sheets Panel Sizing/Scoring Plastic Laminate Single & Double Sided Soft/Hardwood Crosscut Solid Surface Teeth: All108 12 x 2 20 24 28 30 36 42 48 54 60 64 72 80 84 96